Getting errors with the snips 0.60.12, analytics server and audio servers are not running after installing the assistant


#1


#2

analytics are down for everybody (afaik) that’s no problem.

audio-server should be running - but it is not running when there is no speaker connected!
try:
sam service log snips-audio-server
for a detailed log about the error with it


#3

I had already connected the speaker. sometimes the audio server is running. Most of the time it’s not running.


#4

You can use the sudo sam init command If all services are not running


#5

I was tried the “sudo sam init”, but this command is not working.


#6

As you are using Windows use “sam init” after login to your Pi


#7

These are the following commands I was using:
sam login
sam init
sam install assistasnt


#8

You are doing in wrong way

  1. “sam login” is used for login into your snips concole
  2. “sam connect IP address of your Pi” enter pi username and psw
  3. sam init

#9

Are you able to fix that. Please let me know


#10

no. I have just updated my snips 0.49 to 0.50. getting errors while running the “sam init” command


#11

After running command sam connect ip address of your Pi have you got any message like a public key has been generated and copied to the device (RPi)
image


#12

yes. These are the errors I had got.


#13

Which NodeJS version you are using. Check using node -v and npm -v in terminal


#14

node -v 8.6.0

npm -v 5.3.0


#15

Update your NodeJS and npm. Your npm version is low


#16

Are you able to fix that