No audio bluetooth speaker


I am trying to connect my bluetooth speaker to snips on the raspberry pi with home assistant.

I can play a .wav file using aplay and the sound comes out of the speaker, but sound does not come out for snips or for “speaker-test” command.

/etc/asound.conf :

##ps3 eye
## Suggested by
pcm.array {
  type hw
  card CameraB409241

pcm.cap {
  type plug
  slave.pcm "array"
  slave.channels 4
  ttable {
    0.0 30.0
    1.1 30.0

pcm.bluez {
  type plug
    slave.pcm {
      type bluealsa
      device "XX:XX:XX:XX:XX:XX"
      profile "a2dp"

pcm.!default {
    type asym
    playback.pcm "bluez"
    capture.pcm {
        type plug
        slave.pcm "cap"

At the moment sound is forced through the audio jack.

When I try sam setup audio I see 3 outputs/ interfaces:

C:\WINDOWS\system32>sam setup audio
? Is it a Snips Makers Kit? No
√ Found only 1 capture device named: card 1: seeed4micvoicec [seeed-4mic-voicecard], device 0: bcm2835-i2s-ac10x-codec0 ac10x-codec.1-003b-0 []
i Using this device to capture sound
? Found 3 interfaces to output sound.
Choose the one you want to use as your speaker (Use arrow keys)
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1]

I have tried using each of these but still doesnt work for snips. The speaker is connected and trusted okay.

Does the confiuration look right?
How can I get output through the bluetooth speaker?

Thanks for your help!